HOW DO I SWITCH OFF THE WATER MAIN SUPPLY TO MY HOME?

How Do I Switch Off the Water Main Supply to My Home?

How Do I Switch Off the Water Main Supply to My Home?

Blog Article

Get A Quote


We have come across this great article pertaining to How to Turn Off the Water in an Emergency down the page on the net and believe it made good sense to discuss it with you here.


How to Turn Off Water To House and Prevent Damage
One of the most common locations a water pipe will be found in residence is in your boiler room, basement, or a removed panel in a section for your home.
When you locate the water main you will just transform the shutoff clockwise to close all the water off in your home up until you have actually finished the repair work. Some residences will have a ball shutoff with a lever that you can pull rather than turn to shut the water off.
If you try to close the water off to your components by using an angle stop which doesn't work you will need to close of the water main to make your repair. There are likewise several various other reasons you may require to close the water main like repairing frozen pipelines, fixing leaks, replacing fixtures or taps.
Many individuals are not aware that they even have a water main shutoff right in their very own residence and just call a plumber of never end up doing the fixing till things get truly poor due to the fact that they merely do not know that closing the water main is really simple.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Turn off the Water for Plumbing Repairs

We were shown that write-up about How to Locate & Turn Off Main Water Shut-Off Valves through someone on our other site. Feel free to take a moment to share this page if you appreciated it. Many thanks for going through it.



This Post

Report this page